Main Office East Kilbride: 01355 203 333
Ayrshire: 01292 619 799
O'Neil Boiler Company Logo

How to Bleed a Radiator

To bleed a radiator, turn your heating off and let it cool. Then open the bleed valve at the top of the radiator with a radiator key until water starts to come out, and close it again. Finally, check your boiler pressure and top it up if it has dropped. It’s one...

Boiler Not Firing Up? Checks Before You Call an Engineer

If you smell gas, don’t touch any switches. Leave the property and call the National Gas Emergency number on 0800 111 999. A boiler that won’t fire up always seems to happen on the coldest morning of the year. The good news is that a lot of the no-fire...

Hot Water but No Heating (or Heating but No Hot Water)

When your taps run hot but your radiators stay cold, or your radiators are warm but the hot water won’t come through, the boiler itself is usually working fine. The problem is almost always with your controls, or with the part that decides whether hot water goes...

Why Is My Boiler Losing Pressure?

If your boiler pressure drops below 1 bar, your boiler will usually lock out and stop heating your home. A one-off drop after bleeding radiators is normal. But if you’re topping up the pressure every few days or weeks, something is wrong. We’ve been...

Boiler Pressure Too High: Causes and Fixes

For most homes, boiler pressure should sit between 1 and 1.5 bar when the heating is cold, rising to around 2 bar when it’s running. If your gauge is creeping towards 3 bar, the pressure is too high and needs attention. We’ve been servicing and repairing...